品牌aitelong型号sat-1cs 尺寸200*160*42(mm) 重量0.95(kg) 用途e1 test major features
· lcd large-screen display, 320*240 lattice, backlight, led indicator
· hand held, auto configuration
· multi-task operation at one time
· store 20 test results and 9 test configuratio, with power-off memories
· pc operation, store, analysis, print
· programmable timer
· alarm and histogram analysis
· software updatingmajor functio
for 2mbit:
· service-interrupted error testing
· online error testing
· framed and unframed signals generating and receiving
· 2mbit unframed error performance testing
· 2mbit framed n×64kbit channel error testing
· bit error, coding error, frame error, crc error and e bit error testing
· signal loss alarm, ais alarm, framed remote alarm, multi-framed remote alarm, out-of-frame, and pattern loss alarm
· frequency offset testing
· line signal level and frequency testing
· voice channel signal level and frequency testing
· pattern slip testing
· clock slip testing
· straightforward signaling
· audio frequency testing
· loop circuit delay testing
· automatic protection switching time testing (aps)
· clock bias function
· sound monitoring
· duplex 2mbit detecting and monitoring
· signal state display. voice channel content display. voice channel busy indication
· alarm and error histogram analysis
· time slot content analysis, drop and iert signal on each time slot
· framed content analysis
· g.703 template analysis
· g. 821/g. 826/m. 2100 error analysis
· multi error and alarm ierting
· three input modes (terminating, bridging and monitoring)
· three clock optio (internal, external and picking-up)
· jitter testing function
· touch screen tft color lcd (optional)
* the functio of yellow fonts description is a module for user to select.
for datacom:
· v.24/232/v.28, v.35, v.36, x.21, -449, -485, 422, eia-530, eia-530a datacom testing
· synch and asynch testing
· dte and dce emulation
· bit code testing
· pattern slip testing
· signal loss alarm
· line signal level and frequency testing
· loop delay testing
· automatic protection switching time testing(aps)
· g.821, m2100 service interrupt error testing
for co-directional 64kbit:
· service interrupt error testing
· bit code testing
· pattern slip testing
· signal loss, ais alarm
· line signal frequency testing
· loop delay testing
· automatic protection switching time testing(aps)
· g.821, m.2100 error testingtechnical index
·2mbit technical index
(1) signal input rate: 2048kbit ± 100ppm (g.703 requirement±50ppm)
(2) signal code: hdb3, ami.
(3) input jitter tolerance: up to the requirement of figure 10.1.
fig.10.1 input jitter tolerance
(4) input balance respoe: attenuation complies with the law of square root of frequency, and is within the range of 0 to 6db at 1024 khz.
(5) input impedance
(5.1) unbalance terminating: 75w
balance terminating: 120w
reflection loss >18db within 50hz~3100khz
(5.2) unbalance bridging: >750w
balance bridging: >1200w
(5.3) unbalance monitoring: 75w, 26db gain
balance monitoring: 120w, 26db gain
reflection loss >18db within 50hz~3100khz
(6) signal structure
(6.1) unframed structure
(6.2) framed structure: pcm30, pcm31, pcm30crc, pcm31crc
framed structure complies with the requirement of g. 704
(7) testing pattern: 26-1, 29-1, 211-1, 215-1, 220-1, 223-1, and artificial code
(8) impedance of output interface:
(8.1) unbalance 75w, up to g. 703
(8.2) balance 120w, up to g. 703
(9) external clock input
(9.1) signal form: hdb3, nrz
(9.2) balance terminating resistance: 120w
unbalance terminating resistance: 75w
balance bridging resistance: >1200w
unbalance bridging resistance: >750w
(10) error code iertion: none, single, or ratio 10-1~10-7.
·co-directional64k technical index
(1) signal input rate: 64kbit ± 100ppm(g.703 requirement±100ppm)
(2) input impedance: balance 120w, up to g.703
(3) input jitter tolerance: up to g.823.
(4) impedance of output interface: balance 120w, up to g.703
(5) testing pattern: 26-1, 29-1, 211-1, 215-1, 220-1, 223-1, and artificial code
·datacom index
(1) data interface type: v.24, v.35, v.36, x.21, -449, -485, eia-530 and eia-530a.
(2) generator
(2.1) synch mode
clock source: internal or external clock
phase relation between clock and data: co-direction or revee direction.
rate: 1.2, 2.4, 4.8, 9.6, 14.4, 19.2, 38.4, 48, 56(kbps), n×64kbps (n=1~32)
error: ±15ppm (ppm: parts per million)
(2.2) asynch mode
rate: 50,75,110,150,200,300,600,1200,2400,3600,4800,7200,9600; 14.4k,19.2k,38.4k,57.6k(bps)
data structure: word length: 5, 6, 7, 8(bits) stop bit: 1, 2(bits)
odd-even check: odd, even, 1, 0, none
(2.3) error code iertion: none, single, or ratio 10-1~10-7.
(3) receiver
(3.1) synch mode
clock source: internal or external clock
phase relation between receive clock and receive data: equidirection or revee direction.
clock rate: 2048kbps at a maximum
(3.2) asynch mode
the rate and data are the same as those of the generator.
(4) testing pattern: 26-1, 29-1, 211-1, 215-1, 220-1, 223-1, and artificial codeother paramete
· power supply
(1) special power adapter
input: ac220v 50hz
output: dc 9v 1a
(2) internal rechargeable battery
4000mah, 6v nickel-hydrogen rechargeable battery
working time: 8 hou
charging: 8 hou at power-off state, and 12 hou at power-on state
· dimeion and weight
l×w×h: 200×160×42mm
weight: 950g
· ambient paramete
operation temperature: -10~50℃
storage temperature: -30~+70℃
humidity: 5%~90%, non-condeingstandard configuration
no.
item
qty
1
sat-1cs 2m tramission analyzer
1 set
attached files
2
user&quo;s manual
1 pc
3
software disc
1 pc
attached accessories
4
75ω coaxial testing line
1 pc
根
5
bnc-l9 testing line
ceshiyi
2 pcs
6
232 serial line
1 pc
7
special testing cable of data communicationⅰ(v.24,-485,eia-530,eia-530a)
1 pc
8
special testing cable of data communicationⅱ(-449,v.36)
1 pc
9
special testing cable of data communication ⅲ(x.21)
1 pc
10
special testing cable of data communication ⅳ(v.35)
1 pc
11
g.703 co special testing cable(64kb coaxial interface)
1 pc
12
power adapter
1 pc
13
data self-loop head
1 pc
14
switch cable
1 pc
15
handy-case
1 pc
16
serial printing line(optional) □
1 pc